A variety of manifolds are needed in the drilling system, among which cement high-pressure manifolds are an important category. Below, as a professional drilling equipment manufacturer, we will introduce the high-pressure cement manifolds.
For the cement high-pressure manifold in the drilling system, this is probably the case: two high-pressure cement pipes are pumped from the cement to the drill floor, one is connected to the manifold; and the other one is not connected, it stands alone. Drilling surface; in fact, it is used for testing. All pressure-bearing equipment requires periodic pressure testing, such as high-pressure mud manifolds, IBOPs on top drives, high-pressure mud hoses, and of course cement manifolds themselves.
In many places, the management requirements for well control equipment are regularly tested. Usually, the pressure equipment is pressed every two weeks. Because the high pressure cement pump can pump a certain amount of fluid that can be finely controlled and meet the test pressure requirements, It is often used as a test device. Pressure gauges on high pressure mud pumps Because high pressure pumps are often used as test equipment, they are also frequently calibrated and quite accurate; in addition, high pressure test pumps in BOP control systems are typically used to test BOP related functions. However, this pump has a small flow rate and is not suitable for use in equipment testing of large flow volumes. The cement pipe that stops on the drill floor can do the work!
Skype：drilling.hose66
WhatsApp：008618031853252
Telephone：+8631189849942
Email:bella@rotarydrillinghose.com